Home > Shop By Car Make > Chevrolet >

  22936098 OEM 4 Button Key Fob
22936098 GM Factory OEM KEY FOB Keyless Entry Remote Alarm Replace


 
Alternative Views:


Dealer Price $89.95
Our Price: $27.77
Savings: $62.18
Part Numbers: 22936098 | 850K60221 | 22936098 | | 4 BUTTONS | OUC60221 |
Battery Size: CR2032 (sold separately)

Quantity in Stock:62

Product Code:
22936098
Qty:

  
Description Specs & Vehicle Compatibility Before You Purchase
 

Details:
This is a Factory OEM (Original Equipment Manufacturer) 4 button keyless entry remote, aka "key fob" for Buick, Cadillac, Chevrolet, GMC, Pontiac, Saturn, and Suzuki. See "Compatibility Tab" for a full list of compatible vehicles.
These are genuine OEM electronics in a new aftermarket case.

Programming Instructions:

NOTE: 2O11 & newer vehicles must be programmed by an automotive locksmith or dealership.

PROCEDURE #1

THIS PROCEDURE IS FOR VEHICLES WITH THE DRIVER INFORMATION CENTER. IT WILL BE A BUTTON TO THE RIGHT OF THE STEERING WHEEL WITH A VEHICLE ICON AND THE LETTER i.

1. Insert key and switch the ignition ON (just shy of starting vehicle without cranking engine)

2. Press vehicle information button until PRESS TO RELEARN REMOTE KEY is displayed.

3. Press the set/reset button (button will have a check mark) until REMOTE KEY LEARNING ACTIVE is displayed. Vehicle is now in programming mode.

4. Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will be heard indicating successful programming.

5. Repeat step 4 to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALL remotes including existing remotes.

6. To exit programming mode turn ignition OFF, remove key and test all remotes.

PROCEDURE #2

THIS PROCEDURE IS FOR VEHICLES WITHOUT THE DRIVERS INFORMATION CENTER.

1. Insert key into the ignition and turn to ON (Just shy of starting vehicle without cranking engine).

2. Press the trip odometer reset button until RELEARN REMOTE KEY is displayed.

3. Press and hold the trip odometer reset button for approximately 3 seconds until REMOTE KEY LEARNING ACTIVE displays.

4. Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will be heard indicating successful programming.

5. Repeat step 4. to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALL remotes including existing remotes.

6. To exit programming mode turn ignition OFF, remove key and test all remotes.


22936098 | 850K60221 | 22936098 | | 4 BUTTONS | OUC60221 |


Average Rating: 4.5 of 5 Total Reviews: 2 Write a review »

  0 of 0 people found the following review helpful:
 
2007 Avalanche Key Fob June 25, 2016
Reviewer: Michael Tigges from Bryan, TX United States  
Arrived on time.  Easy to program instructions available on site.  Great range of operation.  Wife happy again :-)

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
2008 GM Factory OEM KEY FOB Keyless Entry Remote September 5, 2014
Reviewer: Eddie Saad from FORT WORTH, TX United States  
great

Was this review helpful to you?




We're here for you from purchase to programming!
Unmatched, expert support for ANY keyless remote issue.
We've got your back.

Become a Preferred Business Partner?
Are you a car dealer? Locksmith? Become a Preferred Partner for preferred pricing, dedicated support reps, & more.