Home > Shop By Car Make > Dodge >

05014736 AA Factory OEM KEY FOB Keyless Entry Remote Alarm Replacement
05014736 AA Factory OEM KEY FOB Keyless Entry Remote Alarm Replacement
 
Need a different remote?
Dealer Price $89.95
Our Price: $27.77
Savings: $62.18
FCCID: GQ43VT9T
Part Number: 05014736AA
Interchange Part Number: 1470 102 460
Battery Size: CR2016 x2 (sold separately)

Quantity in Stock:140

Product Code:
05014736AA
Qty:

Description Specs & Vehicle Compatibility Before You Purchase
 

Details:
This is a Factory OEM (Original Equipment Manufacturer) 3 button keyless entry remote, aka "key fob" for Chrysler, Dodge Jeep and Plymouth. See "Compatibility Tab" for a full list of compatible vehicles.
These are genuine OEM electronics in a new aftermarket case.

Programming Instructions:

NOTE: 98 Dodge Durango, 96 Dodge Neon, 98 Dodge Ram, and 96-98 Jeep Grand Cherokee require professional programming by an automotive locksmith or dealership.

Programming for 97-99 Dodge Neon

Obtain all remote transmitters for this vehicle.

 

1. Identify the programming connector. It will be located in the upper edge of the passenger side cowl trim panel. The programming connector will be a single dark green wire with a red moulded connector on the end of it.

2. Using a suitable jumper wire jump the programming connector to ground. This means contact one end of the wire to the connector and the other end to a non-painted metal surface.

3. Insert key into ignition and turn ignition switch to the ON position.

4. Press any button on the first remote to be programmed. To confirm successful programming the door locks will Lock and then Unlock automatically. Repeat this step for any additional remotes that you want programmed to this vehicle.

5. Remove jumper wire and turn ignition off. Test remotes to ensure proper programming.

 

Programming for 96-98 Chrysler Town & Country; 96-98 Dodge Caravan and Grand Caravan; 96-98 Plymouth Voyager and Grand Voyager

YOU MUST HAVE A WORKING REMOTE FOR THIS PROCEDURE TO WORK. IF YOU DON'T HAVE A WORKING REMOTE THEN YOU MUST HAVE A REMOTE PROGRAMMED BY A DEALER OR LOCKSMITH USING DIAGNOSTIC EQUIPMENT.

PLEASE READ ENTIRE PROCEDURE BEFORE PERFORMING. SOME VEHICLES MAY USE ONE OF TWO PROCEDURES. IF PROCEDURE 1. DOES NOT WORK THEN PLEASE USE PROCEDURE 2.

 

Programming procedure #1.

Obtain all remote transmitters for this vehicle.

 

1. Put key in ignition and turn ignition switch to ON position (as far as you can turn key without cranking engine).

2. Press and hold UNLOCK on a currently functioning remote for 4 to 10 seconds.

3. While holding the UNLOCK button during the 4 to 10 second period, press the panic button for one second and release both buttons at the same time. A chime should sound within three seconds to indicate the vehicle has entered programming mode.

4. Press any button on the remote used in step 3. You should hear an audible tone indicating that remote has been re-programmed. This step must be done within 30 seconds of hearing first chime in step 3.

5. Within 30 seconds of completiong step 4. press any button on the next remote. Repeat step 5. for all additional remotes including working remotes.

6. Programming is now complete. Turn ignition off and test remotes to ensure proper programming.

 

Programming Procedure #2

Obtain all remote transmitters for this vehicle.

 

1. Put key in ignition and turn ignition switch to ON position (as far as you can turn key without cranking engine).

2. Press and hold UNLOCK on a currently functioning remote for 4 to 10 seconds.

3. While holding the UNLOCK button during the 4 to 10 second period, press the panic button for one second and release both buttons at the same time. A chime should sound within three seconds to indicate the vehicle has entered programming mode.

4. Press the LOCK and UNLOCK buttons simultaneously on the same remote used in step 3. then release. You should hear an audible tone indicating that the remote was recognized. Once tone is heard press and release the UNLOCK button on that remote. A chime should sound indicating that the remote has been programmed. This must be done within 30 seconds of step 3.

5. Within 30 seconds of completing step 4. press the LOCK and UNLOCK button on the next remote then release. You should hear an audible tone indicating that the remote was recognized. Once tone is heard press and release the UNLOCK button on that remote. A chime should sound indicating that the remote has been programmed. Repeat step 5. for all additional remotes including working remotes.

6. Programming is now complete. Turn ignition off and test remotes to ensure proper programming.

Part Number / FCC ID / Canada
  • 05014736AA
    MODEL / FCC ID: GQ43VT9T
    P/N: 05014736AA
    DAIMLER P/N: CHYSLER
    3 BUTTON
    CANADA: 1470 102 460

Accessories
Lemon Lime Air Freshener Sonic Key Finder Bluetooth Audio Adapter 12" Ice Scraper
Our Price: 1.99
Our Price: 6.95
Our Price: 14.95
Our Price: 7.95
Lemon Lime Air Freshener Sonic Key Finder 12" Ice Scraper

Average Rating: 2 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
used June 30, 2015
Reviewer: Edmundo Perez from Willmar, MN United States  
I received a used Fob, I thought i was buying a new one. For what i paid i really thought it would be new. It arrived extremely fast but a little disappointed it was used or look used. still haven't had it programmed so i don't know if it works yet.

FROM KEYLESS ENTRY REMOTE INC:  Edmundo, sorry you were not expecting a used product.  We state our remotes are used in the "read before you purchase" tab.  Please understand the only way to purchase a new remote is from a franchise dealership and the price will be at least 5 times the amount youpaid with us.  We do have a 100% satisfaction guarantee, so if you would like you can return the remote. Please call us at 402-671-5100 and we can get you a return shipping label.

Was this review helpful to you?




We're here for you from purchase to programming!
Unmatched, expert support for ANY keyless remote issue.
We've got your back.

Become a Preferred Business Partner?
Are you a car dealer? Locksmith? Become a Preferred Partner for preferred pricing, dedicated support reps, & more.