Home > Shop By Car Make > Pontiac >

12522339 Pontiac Factory OEM KEY FOB Keyless Entry Remote Alarm Replace
12522339 Pontiac Factory OEM KEY FOB Keyless Entry Remote Alarm Replace
 
Dealer Price $69.99
Our Price: $11.77
Savings: $58.22
FCCID: ABO0103T | ABO0104T | ABO0116T
Part Number: 12522339
Interchange Part Number: 218 K1200
Battery Size: CR2016 x2 (sold separately)

Quantity in Stock:(Out of Stock)

Product Code:
12522339
Qty:

Description
 

This is a Factory OEM (Original Equipment Manufacturer) Pontiac 3 Button keyless entry remote, aka "key fob".

You will receive one of the listed interchangeable part numbers.

Pontiac

  • 1995 Pontiac Bonneville
  • 1995 Pontiac Grand Am
  • 1995 Pontiac Grand Prix
  • 1994 Pontiac Bonneville
  • 1994 Pontiac Grand Am
  • 1994 Pontiac Grand Prix
  • 1993 Pontiac Bonneville
  • 1993 Pontiac Grand Am
  • 1993 Pontiac Grand Prix

Most remotes can be self-programmed. If these procedures do not work, you must have your remote programmed by a professional automotive locksmith or dealership.
 
Procedure #1 (93-95 Pontiac Grand Am)

Obtain all remote transmitters for this vehicle.

1. Access programming connector in LH side of trunk (drivers side). Programming connector will be close to the tail light, it will not be connected to anything and should be one black and one white wire. It will have a plastic connector on the end of it with two holes in it or ports.

2. Jump programming connector using a suitable jumper wire. Jumping the connector means to use a wire or paperclip bent in the shape of a U to make a connection between the two ports. Be sure you are making contact with the metal inside both ports.

3. System should now lock and unlock doors and activate trunk release to indicate successful entry into programming mode.

4. Press any button on remote one time. System should now lock and unlock doors and activate trunk release to indicate successful programming of remote.

5. Repeat step 4. for each additional remote including working ones.

6. To exit programming mode remove jumper wire and test all remotes.

Procedure #2 (93 Pontiac Bonneville)

Obtain all remote transmitters for this vehicle.

1. Locate the Data Link Connector (DLC) underneath the driver's side dashboard. Please refer to the diagram above to determine the G and A cavity. The letters will not appear on the connector. They are on the diagram for ease of reference.

2. Connect cavity G with cavity A using a fused jumper wire. Your vehicle will respond by locking and unlocking the door locks within 2 seconds.

3. Press any button 3 times in successtion on first remote to be programmed. Locks will lock and unlock verifying remote was programmed.

4. Press any button 3 times in succession on second remote to be programmed if applicable. Locks will lock and unlock to verify remote was programmed.

5. Remove jumper wire and test remote(s)

Procedure #3 (94-95 Pontiac Bonneville)

1. Locate the Data Link Port. It is located under drivers side dash. You may need to lay on the floor and look up under the dash to see it. Be sure you know which ports are 8 and 4. Notice the port is wider on the top row. If you are looking at the port with the wide row on top and the narrow row on bottom, Port 1 will be in the upper left corner and port 8 in the upper right corner. Be sure there are metal pins inside ports 8 and 4. Please refer to the diagram above to locate the proper pins. The numbers are not on the connector, they are only for reference.

2. Connect pin 8 to pin 4 with a suitable jumper wire. Any short piece of wire will work fine. A paper clip bent in the shape of a U will work perfect. (leave the jumper wire connected throughout the programming procedure).

3. Insert key into the ignition and turn the ignition cylinder to the ON position. The vehicle will respond by locking and unlocking the doors to indicate vehicle has entered programming mode.

4. Press and hold both the LOCK and UNLOCK buttons together on the first remote to be programmed. After about 15 seconds, the vehicle will respond by locking and unlocking the doors. Release the buttons on the remote.

5. Within one minute, repeat step 4 on all additional remotes including working ones to be programmed.

6. Remove the jumper wire connected to the Data Link Port.

Procedure #4 (93-95 Pontiac Grand Prix)

Obtain all remote transmitters for this vehicle.

1. Access programming connector in RH side of trunk (passenger side) you may need to pull back some trim to find or access it. Connector will not be connected to anything and should be one black/white wire. It will have a plug on the end of it with one hole in it or port.

2. Jump programming connector using a suitable jumper wire with ground. Jumping the connector means to use a wire or paperclip to make a connection between the port and ground. Be sure you are making contact with the metal inside the port and touch the other end of the jumper wire to a nearby bolt or unpainted metal surface on the body of the vehicle.

3. System should now lock and unlock doors to indicate successful entry into programming mode.

4. Press any button on remote one time. System should now lock and unlock doors to indicate successful programming of remote.

5. Repeat step 4. for each additional remote including working ones.

6. To exit programming mode remove jumper wire and test all remotes.

We are proud to offer true OEM key fobs direct to you at up to 80% off dealer prices. There is a catch though, so here it goes:

You need to know the only way to get a NEW OEM key fob is to go to a dealer or authorized reseller of OEM parts, and you will pay dealer prices if you do this and spend hundreds of dollars.

The key fob you are going to purchase from us is used or as we like to say "previously loved". We recycle OEM key fobs and put them through a rigorous refurbishing process so we can guarantee our products and offer them at a reasonable price along with saving the environment. Oh, and we are not robbing you of your hard earned dollars like the stealership does. So if you are good with all of this what are you waiting for? Make your life easier, order a key fob from us and save the world!


Accessories
Anti-Slip Dash Mat Resqme Car Escape Keychain Tool FIXD Car Health Monitor Bluetooth Audio Adapter
Our Price: $2.49
Our Price: $9.95
Our Price: $59.95
Our Price: $14.95
Anti-Slip Dash Mat Resqme Car Escape Keychain Tool FIXD Car Health Monitor

Share Your Knowledge of this Product. Be the first to write a review »


We Are the Key Fob Experts
Unmatched, expert support for ANY keyless remote issue.
We've got your back.

Key Fob Programming Instructions
Key Fob & Transponder Key Programming Instructions for over 5,000 vehicles!

Are You a Locksmith?
Join the Locksmith Advantage Program for exclusive pricing, dedicated support, & more!