Home > Shop By Car Make > Chevrolet > Tahoe > 2000 Chevrolet Tahoe >

2000 Chevrolet Tahoe OEM 3 Button Key Fob
2000 Chevrolet Tahoe Key Fob
 

Dealer Price $119.99
Our Price: $33.77
Savings: $86.22
FCCID: ABO1502T
Battery Size: CR2032 (sold separately)

Quantity in Stock:36

Product Code:
OEM-1502T-S2-2000-CHEV-TAHOE
Qty:

Description Before You Purchase
 

Details:
This is a Factory OEM (Original Equipment Manufacturer) 3 button keyless entry remote, aka "key fob" for a 2000 Chevrolet Tahoe.
These are genuine Chevrolet OEM electronics in a new aftermarket case.

Programming Instructions:

Classic body style-



1. Collect all remotes that you wish to program. This procedure will erase all previously programmed remotes. You must program all existing and new remotes that you wish to use on the vehicle at this time.

2. Locate the Data Link Port underneath the driver side dashboard use image above for reference.

3. Jump terminal 8 to terminal 4.

4. Use a jumper wire or bent paper clip to connect the two ports. Locks will cycle to confirm programming.

5. Press and hold lock and unlock button on the remote being programmed. Hold until the locks cycle again signaling successful programming. Repeat this step for any additional remotes.

6. Remove the jumper wire or paperclip to exit programming mode.

New body style-
1. Collect all remotes that you wish to program. This procedure will erase all previously programmed remotes. You must program all existing and new remotes that you wish to use on the vehicle at this time.

2. Close all doors, insert key into ignition do not turn it.

3. Hold the Unlock button on the driver's door DO NOT RELEASE.

4. Quickly turn ignition ON OFF, ON OFF. Do not start the car turn the key to the ON position on the cylinder.

5. Release the Unlock button. Locks will cycle from lock to unlock signaling entering of programming mode. If the locks cycle before you release the unlock button the programming will not work. Repeat from step 1.

6. Press and hold the Lock and Unlock button on the remote being programmed until the locks cycle again. This signals your vehicle has been successfully programmed. Repeat this step for any additional remote.

7. Turn the key to the on position to exit from programming mode.


Accessories
Anti-Slip Dash Mat Resqme Car Escape Keychain Tool FIXD Car Health Monitor Bluetooth Audio Adapter
Our Price: $2.49
Our Price: $9.95
Our Price: $59.95
Our Price: $14.95
Anti-Slip Dash Mat Resqme Car Escape Keychain Tool FIXD Car Health Monitor

Average Rating: 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
Finally! Yes November 18, 2017
Reviewer: Jed colvin from Ventura, CA United States  
I bought my truck and it was used, only came with a key. I had no clue it had a fob once. My wife surprised me with the key fob AND used the easy instructions to get it coded to my truck.  So stoked!

Was this review helpful to you?



We Are the Key Fob Experts
Unmatched, expert support for ANY keyless remote issue.
We've got your back.

Key Fob Programming Instructions
Key Fob & Transponder Key Programming Instructions for over 5,000 vehicles!

Are You a Locksmith?
Join the Locksmith Advantage Program for exclusive pricing, dedicated support, & more!