Home > Shop By Car Make > Chevrolet > Suburban > 2008 Chevrolet Suburban >

2008 Chevrolet Suburban OEM 4 Button Key Fob
2008 Chevrolet Suburban OEM 4 Button Key Fob
 
Alternative Views:



Dealer Price $89.95
Our Price: $27.77
Savings: $62.18
Part Numbers:
FCCID: OUC60270 or OUC60221
Battery Size: CR2032 (sold separately)

Quantity in Stock:(Out of Stock)

Product Code:
OEM-OUC-S2-2008-CHEV-SUBURBAN
Qty:

  
Description Before You Purchase
 

Details:
This is a Factory OEM (Original Equipment Manufacturer) 4 button keyless entry remote, aka "key fob" for a 2008 Chevrolet Suburban.
These are genuine Chevrolet OEM electronics in a new aftermarket case.

Programming Instructions:

PROCEDURE #1

THIS PROCEDURE IS FOR VEHICLES WITH THE DRIVER INFORMATION CENTER. IT WILL BE A BUTTON TO THE RIGHT OF THE STEERING WHEEL WITH A VEHICLE ICON AND THE LETTER i.

1. Insert key and switch the ignition ON (just shy of starting vehicle without cranking engine)

2. Press vehicle information button until PRESS TO RELEARN REMOTE KEY is displayed.

3. Press the set/reset button (button will have a check mark) until REMOTE KEY LEARNING ACTIVE is displayed. Vehicle is now in programming mode.

4. Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will be heard indicating successful programming.

5. Repeat step 4 to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALL remotes including existing remotes.

6. To exit programming mode turn ignition OFF, remove key and test all remotes.

PROCEDURE #2

THIS PROCEDURE IS FOR VEHICLES WITHOUT THE DRIVERS INFORMATION CENTER.

1. Insert key into the ignition and turn to ON (Just shy of starting vehicle without cranking engine).

2. Press the trip odometer reset button until RELEARN REMOTE KEY is displayed.

3. Press and hold the trip odometer reset button for approximately 3 seconds until REMOTE KEY LEARNING ACTIVE displays.

4. Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will be heard indicating successful programming.

5. Repeat step 4. to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALL remotes including existing remotes.

6. To exit programming mode turn ignition OFF, remove key and test all remotes.


Accessories
Sonic Key Finder Bluetooth Audio Adapter 12" Ice Scraper Lemon Lime Air Freshener
Our Price: $6.95
Our Price: $14.95
Our Price: $7.95
Our Price: $1.99
Sonic Key Finder 12" Ice Scraper Lemon Lime Air Freshener

Share Your Knowledge of this Product. Be the first to write a review »



We're here for you from purchase to programming!
Unmatched, expert support for ANY keyless remote issue.
We've got your back.

Become a Preferred Business Partner?
Are you a car dealer? Locksmith? Become a Preferred Partner for preferred pricing, dedicated support reps, & more.