Keyless Entry Remote
close
close
Limited Time Offer! 15% Off Any 2 or More Key Fobs
click to zoom in

Acura CL OEM 4 Button Key Fob Remote

No reviews yet Write a Review
$40.77
Dealer price: $119.99
(You save $79.22 )
SKU:
OEM-A108-4B-ACURA-CL
FCCID:
A269ZUA108
Battery Size:
CR2025(sold separately)
custom_label_0:
Acura
custom_label_1:
CL
custom_label_2:
1997-1999
custom_label_3:
Key Fob Remote Replacement
custom_label_4:
A269ZUA108 4 Button
Product Type:
Key Fobs
fbt-product:
/life-time-protection-plan/
fbt-product:
/add-batteries-for-this-key-fob-only-4-49/
fbt-product:
/magnetic-quick-connect-keychain/
Lifetime Protection Plan:
Add Protection Plan $6.95
Battery:
Add Battery $5.49
5% Off Orders $55 Or More
details
  • Discount applied in cart
  • Cannot be combined with other discounts or offers
  • Discounts do not apply to professional programming and key cutting equipment
  • Discount does not apply to key fobs with bulk pricing options
15% Off Any 2 or More Key Fobs
details
  • Discount applied in cart
  • Cannot be combined with other discounts or offers
  • Offer only valid for in stock products
  • Discounts do not apply to professional programming and key cutting equipment
  • Discount does not apply to key fobs with bulk pricing options

Delivery

Free Standard Shipping & Returns

on Orders of $55 or More
Shipping to:35260

Get it by Fri ,Nov 27 with Express Shipping

Acura CL OEM 4 Button Key Fob Remote

$40.77
Dealer price: $119.99
(You save $79.22 )

Frequently Bought Together

Save 20% on batteries and protection plan when you add both. (discount applied in cart)

Please choose options for all selected products

Related Products

This is a Factory OEM (Original Equipment Manufacturer) Acura CL 4 Button keyless entry remote, aka "key fob".

OEM electronics in a new aftermarket case.

1997-1999 Acura CL

There are two possible programming procedures. If the first procedure does not work, please try the second procedure.

Procedure #1

Obtain all remote transmitters for this vehicle and read the instructions prior to programming.

Entering programming mode will erase all previously programmed remotes for this vehicle. You must have all remotes available for programming including working ones.

  • Enter vehicle and close all doors
  • Each of the following steps must be completed within five seconds of completing the previous step. If you take longer than five seconds or make a mistake, you must start the entire procedure over.
  • Insert the key into the ignition, hold one remote in your left hand with additional remotes close by. We recommend taking remotes off the key ring to perform the procedure. When the instructions say to press the LOCK button, you should press the LOCK button on the remote for approximately one second then release it.

Perform each of the next three steps in order, then repeat all three steps two more times for a total of three times each.

  1. Turn the ignition to the ON position, marked II.
  2. Press the LOCK button on the remote.
  3. Turn the ignition to the OFF position, marked I. (Do steps 1-3 three times)

Next, turn the ignition switch to ON position, marked II.

     4. Using the same remote, press the LOCK button again. The door locks should cycle indicating the vehicle has ENTERED programming mode.

     5. Using the same remote, press the LOCK button again. The door locks should cycle indicating the vehicle has PROGRAMMED that remote.

If you have other remotes to program then repeat step 5 with each additional remote one after another. Step 5 must be completed within ten seconds for each additional remote. You may program up to three remotes.

     6.  Turn the ignition to OFF. Test all remotes.

If your remote has a trunk button you will need to hold that button down for several seconds for that function to operate.

Procedure #2
  1. Turn ignition to ON. (ON is the position just shy of starting the vehicle without cranking engine)
  2. Press and hold the valet/disarm button located on the bottom of the dashboard to the left or right below the steering wheel. (You must hold the valet button until instructed to release)
  3. The system LED on the upper steering column will flash indicating the vehicle is in programming mode.
  4. Press the top button on the remote. The parking lights will flash to confirm successful programming of this remote.
  5. Repeat step 4. for all additional remotes to be programmed.
  6. Release valet/disarm button to exit programming mode. Test all remotes.

 

Please note: This system uses a stacking memory for remotes. The most recent remote programmed will bump the oldest remote. You can program up to four remotes. If you need to erase lost or stolen remotes then simply program one remote four times. If you have two remotes you can program one, three times then, program the second once and so on.

OEM Key Fobs:

We are proud to offer true OEM key fobs direct to you at up to 80% off dealer prices. There is a catch though, so here it goes: You need to know the only way to get a NEW OEM key fob is to go to a dealer or authorized reseller of OEM parts, and you will pay dealer prices if you do this and spend hundreds of dollars.

Our Products:

The key fob you are going to purchase from us is used or as we like to say "previously loved". We recycle OEM key fobs and put them through a rigorous refurbishing process so we can guarantee our products and offer them at a reasonable price along with saving the environment. Oh, and we are not robbing you of your hard earned dollars like the stealership does. So if you are good with all of this what are you waiting for? Make your life easier, order a key fob from us and save the world!

Acura CL OEM 4 Button Key Fob

We Are The Experts

Unmatched, expert support for ANY keyless remote issue. We've got your back!

Need Help?

Stay In The Know

Sign up for Keyless Entry Remote's News, Sales, and Deals.

Join Our Mailing List

Programming Instructions

Remote & Transponder Key Programming Instructions for over 5,000 vehicles!

Find Yours