Home > Shop By Car Make > Plymouth > Grand Voyager >

Plymouth Grand Voyager OEM 3 Button Key Fob

1991-1997 Plymouth Grand Voyager OEM Key Fob Remote GQ43VT5T | GQ43VT7T
 
Dealer Price $69.99
Our Price: $9.77
Savings: $60.22
FCCID: GQ43VT5T | GQ43VT7T
Interchange Part Number: 04469341 | 04688527 | 04759136 AB
Battery Size: CR2016 x2 (sold separately)

Quantity in Stock:448

Product Code:
OEM-GQ43VT-3B-PLYM-GRANDVOY
Qty:

Description
 

This is a Factory OEM (Original Equipment Manufacturer) Plymouth Grand Voyager 3 Button keyless entry remote, aka "key fob".

1991-1997 Plymouth Grand Voyager

93-95 Plymouth Grand Voyager
Obtain all remote transmitters for this vehicle.
1. Open the glove box and lower down by releasing catch tabs.
2. Insert key into ignition and turn ignition switch to the ON position. (Just shy of cranking the engine)
3. Find the program connector behind the glove box and jump to ground. This means to take a wire and contact the metal in the connector to a non-painted metal surface that is a suitable ground. When done properly the door locks will Lock and then Unlock automatically. The vehicle is now in programming mode.
4. Press any button on the remote. The doors will again Lock and Unlock automatically when the signal has been received from the remote and programmed successfully. Repeat this step for each remote that needs to be programmed to the vehicle.
5. Remove the jumper wire to ground and the programming procedure is now done. Test each remote to ensure it functions.

 

96-97 Plymouth Grand Voyager
NOTE: You must have a working remote to program another remote. Vehicles may use one of two procedures listed below. If you do not currently have a working remote, programming must be completed by a professional locksmith or dealership.
 
Programming Procedure #1
Obtain all remote transmitters for this vehicle.
 
1. Put key in ignition and turn ignition switch to ON position (as far as you can turn key without cranking engine).
2. Press and hold UNLOCK on a currently functioning remote for 4 to 10 seconds.
3. While holding the UNLOCK button during the 4 to 10 second period, press the panic button for one second and release both buttons at the same time. A chime should sound within three seconds to indicate the vehicle has entered programming mode.
4. Press any button on the remote used in step 3. You should hear an audible tone indicating that remote has been re-programmed. This step must be done within 30 seconds of hearing first chime in step 3.
5. Within 30 seconds of completing step 4, press any button on the next remote. Repeat step 5 for all additional remotes including working remotes.
6. Programming is now complete. Turn ignition off and test remotes to ensure proper programming.
 
Programming Procedure #2
Obtain all remote transmitters for this vehicle.
 
1. Put key in ignition and turn ignition switch to ON position (as far as you can turn key without cranking engine).
2. Press and hold UNLOCK on a currently functioning remote for 4 to 10 seconds.
3. While holding the UNLOCK button during the 4 to 10 second period, press the panic button for one second and release both buttons at the same time. A chime should sound within three seconds to indicate the vehicle has entered programming mode.
4. Press the LOCK and UNLOCK buttons simultaneously on the same remote used in step 3. then release. You should hear an audible tone indicating that the remote was recognized. Once tone is heard press and release the UNLOCK button on that remote. A chime should sound indicating that the remote has been programmed. This must be done within 30 seconds of step 3.
5. Within 30 seconds of completing step 4, press the LOCK and UNLOCK button on the next remote then release. You should hear an audible tone indicating that the remote was recognized. Once tone is heard press and release the UNLOCK button on that remote. A chime should sound indicating that the remote has been programmed. Repeat step 5 for all additional remotes including working remotes.
6. Programming is now complete. Turn ignition off and test remotes to ensure proper programming.

OEM Key Fobs:

We are proud to offer true OEM key fobs direct to you at up to 80% off dealer prices. There is a catch though, so here it goes: You need to know the only way to get a NEW OEM key fob is to go to a dealer or authorized reseller of OEM parts, and you will pay dealer prices if you do this and spend hundreds of dollars.

Our Products:

The key fob you are going to purchase from us is used or as we like to say "previously loved". We recycle OEM key fobs and put them through a rigorous refurbishing process so we can guarantee our products and offer them at a reasonable price along with saving the environment. Oh, and we are not robbing you of your hard earned dollars like the stealership does. So if you are good with all of this what are you waiting for? Make your life easier, order a key fob from us and save the world!


Accessories
Resqme Car Escape Keychain Tool Bluetooth Audio Adapter FIXD Car Health Monitor Anti-Slip Dash Mat
Our Price: $9.95
Our Price: $14.95
Our Price: $59.95
Our Price: $2.49
Resqme Car Escape Keychain Tool Bluetooth Audio Adapter FIXD Car Health Monitor Anti-Slip Dash Mat

Share Your Knowledge of this Product. Be the first to write a review »
We Are The Experts

Unmatched, expert support for ANY keyless remote issue. We've got your back!

Need Help?
Stay In The Know

Sign up for Keyless Entry Remote's News, Sales, and Deals.

Join Our Mailing List
Programming Instructions

Remote & Transponder Key Programming Instructions for over 5,000 vehicles!

Find Yours