This is a Factory OEM (Original Equipment Manufacturer) Infiniti 4 Button keyless entry remote, aka "key fob".

OEM electronics in a new aftermarket case.

Infiniti

• 1997 Infiniti J30
• 1996 Infiniti G20
• 1996 Infiniti J30
• 1996 Infiniti Q45
• 1995 Infiniti G20
• 1995 Infiniti J30
• 1995 Infiniti Q45

Obtain all remote transmitters for this vehicle.

1. Open the trunk, sit in vehicle and close and Lock all doors.
2. Insert key into ignition and fully remove from ignition at least six times in 10 seconds. If you are having problems try varying the speed in which you put the key in and out of the ignition.
3. Manually Unlock and then Lock the driver's door using the knob on the door.
4. Press the LOCK button on the first remote to be programmed within 5 seconds of completing step 3.
5. To program additional remotes repeat step 3 and 4 for each remote. You can program up to 4 remotes to this vehicle.
6. Programming is now complete. Unlock driver's door manually using the door lock knob and open then close door.
7. Test all remotes to ensure proper programming.

You must have all remotes on hand when performing this procedure. Any remotes not used during this procedure will become inactive.

1. Open The Trunk.
2. Close and LOCK all doors with the driver's side power lock / unlock switch located on drivers door panel.
3. Insert key into ignition (DON'T TURN) and remove it from the ignition key cylinder at least 6 times within 10 seconds (this will need to be done at approximately one second intervals). PLEASE NOTE: Withdraw key completely from ignition cylinder each time. If this procedure is performed too fast or too slow the system will not enter programming mode.
4. UNLOCK then LOCK all doors with the driver's side power lock / unlock switch located on drivers door panel
5. Within 5 seconds, push LOCK button on the keyless remote. PLEASE NOTE: Do not press the button on the remote more than one time or the programming will not be successful.
6. If there are any remaining remotes (including working ones), Unlock then Lock all doors using the switch on drivers door panel. Within 5 seconds of locking and unlocking doors press the LOCK button on the next remote. Repeat this step for each remote.
7. When all remotes have been programmed open drivers door to exit programming mode. Test all remotes.

OEM Key Fobs:

We are proud to offer true OEM key fobs direct to you at up to 80% off dealer prices. There is a catch though, so here it goes: You need to know the only way to get a NEW OEM key fob is to go to a dealer or authorized reseller of OEM parts, and you will pay dealer prices if you do this and spend hundreds of dollars.

Our Products:

The key fob you are going to purchase from us is used or as we like to say "previously loved". We recycle OEM key fobs and put them through a rigorous refurbishing process so we can guarantee our products and offer them at a reasonable price along with saving the environment. Oh, and we are not robbing you of your hard earned dollars like the stealership does. So if you are good with all of this what are you waiting for? Make your life easier, order a key fob from us and save the world!