This is a Factory OEM (Original Equipment Manufacturer) Nissan 3 Button keyless entry remote, aka "key fob".
OEM electronics in a new aftermarket case.
2004-2015 Nissan Armada
2002-2019 Nissan Frontier
2003-2008 Nissan Murano
2012-2018 Nissan NV
2015-2016 Nissan NV200
2004-2017 Nissan Titan
2002-2013 Nissan Pathfinder
2005-2010 Nissan Quest
2007-2012 Nissan Sentra
2007-2013 Nissan Versa
2002-2016 Nissan Xterra
Most remotes can be self-programmed. If this procedure does not work, you must have your remote programmed by a professional automotive locksmith or dealership.
Note: You must have all remotes on hand when performing this procedure. Any remotes not used during this procedure will become inactive.
Close and lock all doors with the driver's side power lock / unlock switch located on drivers door panel.
Insert key into ignition (DON'T TURN) and remove it from the ignition key cylinder at least 6 times within 10 seconds (this will need to be done at approximately one second intervals). Your hazard lamps will flash if you have performed this step correctly. PLEASE NOTE: Withdraw key completely from ignition cylinder each time. If this procedure is performed too fast or too slow the system will not enter programming mode.
Insert key into ignition and turn to the ACC position.
Within 5 seconds, push the LOCK button on the keyless remote. Your hazard lamps will flash. PLEASE NOTE: Do not press the button on the remote more than one time or the programming will not be successful.
If there are any remaining remotes (including working ones), Unlock then Lock all doors using the switch on drivers door panel. Within 5 seconds of locking and unlocking doors press LOCK button on the next remote. Your hazard lamps will flash. Repeat this step for each remote (including any working remotes).
When all remotes have been programmed turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver’s side power lock/unlock switch and open the driver side door. Test all remotes.
We are proud to offer true OEM key fobs direct to you at up to 80% off dealer prices. There is a catch though, so here it goes:
You need to know the only way to get a NEW OEM key fob is to go to a dealer or authorized reseller of OEM parts, and you will pay dealer prices if you do this and spend hundreds of dollars.
The key fob you are going to purchase from us is used or as we like to say "previously loved". We recycle OEM key fobs and put them through a rigorous refurbishing process so we can guarantee our products and offer them at a reasonable price along with saving the environment. Oh, and we are not robbing you of your hard earned dollars like the stealership does. So if you are good with all of this what are you waiting for? Make your life easier, order a key fob from us and save the world!
When i first inquired about a new remote for my daughters car, they didn't show the same remote i had that they had showing available. So with a quick e-mail to inquire about that, they set my mind at ease. I ordered the same remote i already had and went to their web site for programming. It walked me step by step and i reprogrammed the new remote, it was super easy. Shipping was fast and I was pleased with everything.
2010 Frontier remote
Posted by Donnie Carney on Jul 10th 2017
Whata savings super fast delivery, easy instruction on Utube, I was up and going in less than 15mins and saved $160.00 at the Nissan Dealer, Thank you Donnie " Golfer Exrtaordinaire " I tell all my friends about you Super service.
Posted by Art on Apr 18th 2016
This was exactly what I needed to get the keyless entry on my Xterra working again. Followed the instructions and was done in less than a minute!