Get it by Fri ,Nov 27 with Express Shipping
This is a Factory OEM (Original Equipment Manufacturer) Ford 4 Button keyless entry remote, aka "key fob".
1. Insert Key and turn it to the RUN or ACC position (do not start the car.)
2. Locate the programming connector at the base of the steering column, behind the passenger glove box, or in the left-rear quarter panel area. Exact locations vary from vehicle to vehicle. Two wires will be leading to the connector with a plastic end , the connecter will not be connected to anything. Jump the terminals inside the connector. Use either a jumper wire or bent paperclip. Make contact to the metal inside each terminal. Doors will cycle lock to unlock or horn will chirp signaling programming mode.
3. Press any button on the remote being programmed locks will cycle signaling successful programming.
Repeat for additional remotes.
4. Turn off ignition and remove jumper wire.
We are proud to offer true OEM key fobs direct to you at up to 80% off dealer prices. There is a catch though, so here it goes:
You need to know the only way to get a NEW OEM key fob is to go to a dealer or authorized reseller of OEM parts, and you will pay dealer prices if you do this and spend hundreds of dollars.
The key fob you are going to purchase from us is used or as we like to say "previously loved". We recycle OEM key fobs and put them through a rigorous refurbishing process so we can guarantee our products and offer them at a reasonable price along with saving the environment. Oh, and we are not robbing you of your hard earned dollars like the stealership does. So if you are good with all of this what are you waiting for? Make your life easier, order a key fob from us and save the world!