Keyless Entry Remote
close
close
Limited Time Offer! 15% Off Any 2 or More Key Fobs

1998 - 2001 Nissan Pathfinder Key Fob Remote Programming Instructions

Posted by Keyless Entry Remote on Feb 11th 2013


Here are the programming instructions for a 1998 - 2001 Nissan Pathfinder Key Fob Remote. If you need an extra Replacement Key Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog. If you like what we provide please forward on to your friends & family and share via the social media icons below; people like you are our best advertising tool!



ORDER THIS KEY FOB PART NUMBER HERE:  KBRASTU09

Nissan Pathfinder Key Fob Replacement


IMPORTANT: Before entering programming mode, have in possession all of the transmitters you will be Using on the vehicle. Once you program the transmitter, all previous codes will be erased from the memory. The other transmitters will not be functional until you program the transmitters again.

1.   Close and lock all doors with the driver’s side power lock/unlock switch.

2.   Insert key into ignition and remove it from the ignition key cylinder at least six times within 10 seconds.     Your Hazard Lamps will flash if you have performed this step successfully. NOTE: Withdraw key     completely from ignition cylinder each time. If this procedure is performed too fast, system will not enter   programming mode.

3.   Insert key into the ignition cylinder and turn to the ACC position.

4.   Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should flash.     NOTE: Do not press the button more than one time in the above step. If the button is pressed more than     one time, the programming procedure will not be successful.

5.   If there are any remaining transmitters (including the old ones), unlock then lock all doors using the     driver’s side power lock/unlock switch and within 5 seconds, push ANY button on the next remote.  Your Hazard Lamps should flash. Repeat this step for each transmitter (including any existing transmitters).

6.   Turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver’s side      power lock/unlock switch and open the driver side door.

Having trouble programming the remote or just want a professional to program the remote for you? Use our trusted professional key fob programmer tool to find a trusted automotive locksmith in your area.

We Are The Experts

Unmatched, expert support for ANY keyless remote issue. We've got your back!

Need Help?

Stay In The Know

Sign up for Keyless Entry Remote's News, Sales, and Deals.

Join Our Mailing List

Programming Instructions

Remote & Transponder Key Programming Instructions for over 5,000 vehicles!

Find Yours