Here are the programming instructions for a 2005 Kia Sedona Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog. If you like what we provide please forward on to your friends & family and share via the social media icons below; people like you are our best advertising tool!
ORDER THIS KEY FOB PART NUMBER HERE: PLN BONTEC-T009
1. Open the hood and find the Data Link Connector. Jump pin 5 and 17. You can use a jumper wire or a bent paper clip. Bend the wire or paperclip and make contact to pins 5 and 17.
2. Insert key and turn ignition to the On position. Press the Lock button on the remote two times. Vehicle will make a chime when programmed successfully
3. Exit programming turn off key and remove jumper wire.
ORDER THIS KEY FOB PART NUMBER HERE: PLN BONTEC-T009
1. Open the hood and find the Data Link Connector. Jump pin 5 and 17. You can use a jumper wire or a bent paper clip. Bend the wire or paperclip and make contact to pins 5 and 17.
2. Insert key and turn ignition to the On position. Press the Lock button on the remote two times. Vehicle will make a chime when programmed successfully
3. Exit programming turn off key and remove jumper wire.
Having trouble programming the remote or just want a professional to program the remote for you? Use our trusted professional key fob programmer tool to find an automotive locksmith in your area.
