Here are the programming instructions for a 1997 Infiniti J30 Key Key Fob Remote. Don't forget to check our store if you need an extra Key Fob or Replacement Fob for any vehicle you might have. Keylessentryremotefob.com
·
1 Close all doors and lock all doors
·
2 From the door switch unlock the trunk.
·
3 Insert and remove the key from the ignition key cylinder more than
six times within 10 seconds.
·
NOTE :Key should be withdrawn from ignition key cylinder completely each
time.
·
NOTE: Do not rush the insertion/removal key cycling process. The side
marker/tail/license lamps and interior illumination will flash twice when this
step is accurately completed.
·
NOTE: At this time, the new ID code is entered and original (previous)
ID codes are erase.
·
4 Manually unlock and lock the driver side door
·
5 Push any button on the new remote controller once.
·
NOTE: If there is only one remote controller skip step 6.
·
6 Additional ID code entry Repeat
step 4 and 5
·
7 END.
·
NOTE: If you need to activate more than two additional new remote
controllers, repeat the procedure on step 6 "Additional ID code
entry" for each new remote controller.
·
NOTE: Entry of maximum four ID codes is allowed and any attempt to enter
more will be ignore.
Having trouble programming the remote or just want a professional to program the remote for you? Enter your city or zip code in the search box below to find a professional key fob installer in your area.
ENTER YOUR CITY NAME OR ZIP CODE TO FIND A
PROFESSIONAL KEY FOB INSTALLER NEAR YOU
Was This Information Useful? Please take a moment to help support this blog with a donation of any amount! Your donations help keep this site up to date. If you are unable to donate, please share via social media below, your help in getting the word out about us helps just as much! Thanks for visiting, donating, and sharing with your friends and family!
