2000 Acura TL Key Fob Remote Programming Instructions

Here are the programming instructions for a 2000 Acura TL Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog. If you like what we provide please forward on to your friends & family and share via the social media icons below; people like you are our best advertising tool!




Note:
 Entering the programming mode cancels all learned keyless remotes, so
 none of the previously programmed remotes will work. You must reprogram
 all of the keyless remotes once you are in the programming mode.
 You must complete each step within 4 seconds of the previous step to keep
 the system from exiting  the programming mode. You must program remotes
 within 10 seconds of each other

 1. Turn ignition switch to ON (II)

 2. Within 4 seconds press the LOCK or UNOCK button on one of the remotes.
     (An unprogrammed remote can be used for this step.)

 3. Within 4 seconds turn ignition switch to LOCK (0) position

 4. Within 4 seconds turn the ignition switch to ON (II)

 5. Repeat steps 2, 3 and 4 two more times using the same keyless remote
     used in step 2

 6. Within 4 seconds press the LOCK or UNLOCK button on the same remote.
     Make sure the power door locks cycle to confirm you are in programming
     mode.

 7. Within 10 seconds press the LOCK or UNLOCK button on same remote.

 8. Within 10 seconds press the LOCK or UNLOCK button on all other
      remotes you want to program. Make sure door locks cycle after you push
      each remote button to confirm system has accepted the remote.

 9. Turn the igniton switch to LOCK (0) to exit programming mode.

10. Test remote(s)




Was This Information Useful?  Please take a moment to Like / Follow us and share via social media below. It is people like you that help spread the word about us.  It helps so much!  Thanks for visiting and sharing with your friends and family!