Keyless Entry Remote
close
close
Limited Time Offer! 15% Off Any 2 or More Key Fobs

2007 Chevrolet Impala Key Fob Remote Programming Instructions

Posted by Keyless Entry Remote on Feb 10th 2013


Here are the programming instructions for a 2007 Chevrolet Impala Key Fob Remote. Visit our huge selection of OEM key fobs if you need an Chevrolet key fob replacement.  You can also leave comments or suggestions at the bottom of this blog. If you like what we provide please forward on to your friends & family and share via the social media icons below; people like you are our best advertising tool!



ORDER THIS KEY FOB PART NUMBER HERE:  15912859

2007 chevrolet impala key fob replacement




Use this Procedure for Vehicles with  Driver Information Center Buttons.  This information is in your Owners Manual in the Drivers Information Center Section.

1. Insert Key and turn to ON position so you can access Driver Information Center.

2. Press the vehicle information button until.  PRESS TO RELEARN REMOTE KEY displays.

3. Press the set/reset button until
    REMOTE KEY LEARNING ACTIVE  displays

4.  Press and hold the lock and unlock buttons on the keyless remote at the same time for approximately 15 seconds. A chime will sound indicating that the remote is programmed.

5.  To program additional remotes at this time repeat step 4. This vehicle can have a maximum of eight remotes programmed.

6.  To exit programming mode turn key off and remove key. Test remote(s).

Use this Procedure for Vehicles without Drivers Information Center Buttons

To access this display, the vehicle must be in Park (P) with key in the on position (as far as you can go without cranking engine)  1. Press the trip odometer reset stem until RELEARN REMOTE KEY displays.

2. Press and hold the trip odometer reset stem for three seconds. The message  REMOTE KEY LEARNING ACTIVE  will display.

3.  Press and hold the lock and unlock buttons on the first keyless remote at the same time for approximately 15 seconds. A chime will sound indicating that the remote is programmed.

4.  To program additional remotes at this time repeat step 3. This vehicle can have a maximum of eight remotes programmed.

5.  To exit programming mode turn key off and remove key. Test remote(s).

Having trouble programming the remote or just want a professional to program the remote for you? Use our trusted professional key fob programmer tool to find a trusted automotive locksmith in your area.

We Are The Experts

Unmatched, expert support for ANY keyless remote issue. We've got your back!

Need Help?

Stay In The Know

Sign up for Keyless Entry Remote's News, Sales, and Deals.

Join Our Mailing List

Programming Instructions

Remote & Transponder Key Programming Instructions for over 5,000 vehicles!

Find Yours