null
close
close
*Exclusions
Apply

2007 Honda Civic Key Fob Remote Programming Instuctions

Posted by Keyless Entry Remote on Feb 27th 2013


Here are the programming instructions for a 2007 Honda Civic Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog. If you like what we provide please forward on to your friends & family and share via the social media icons below; people like you are our best advertising tool!

ORDER THIS KEY FOB PART NUMBER HERE:  N5F-S0084A









This procedure clears the transmitter codes and creates new ones, so you must program all remotes at the same time, even if one or more is already working.


Enter the car, and close all doors.


Each of the following steps must be completed within five seconds of completing the previous step. If you take longer or make a mistake, start the entire procedure over again.


Insert the key into the ignition, and hold one remote in your left hand. Whenever the instructions say to press the LOCK button, you should press the lock button on the remote for about a second and then release it.


Perform each of the following three steps in order, then repeat all three steps two more times, for a total of three times each:


1. Turn the ignition switch to the ON position, marked II.
2. Press the LOCK button.
3. Turn the ignition switch to the Off position, marked I.


Do this three times!


Next, turn the ignition switch to the ON position (II) for a fourth time.


Press the LOCK button again. The door locks should now make a cycling sound, indicating that the system has entered Programming Mode.


Press the LOCK button one more time to program this remote. If you have other remotes to program, press the LOCK button on each one in turn. The door locks should make the cycling sound after you press LOCK on each remote. You may program up to three remotes, and they must all be programmed within ten seconds of each other.


Turn the ignition off and remove the key. The remotes are now programmed and may be tested.


If you've got a trunk/hatch release, hold the button for this function for a few seconds



Was This Information Useful?  Please take a moment to Like / Follow us and share via social media below. It is people like you that help spread the word about us.  It helps so much!  Thanks for visiting and sharing with your friends and family!


Subscribe To Our Social Networks For Special Discounts, Offers, & Contests!

        
By Keyless Entry Remote Inc

We Are The Experts

Unmatched, expert support for ANY keyless remote issue. We've got your back!

Need Help?

Stay In The Know

Sign up for Keyless Entry Remote's News, Sales, and Deals.

Join Our Mailing List

Programming Instructions

Remote & Transponder Key Programming Instructions for over 5,000 vehicles!

Find Yours