Here are the programming instructions for a 1996 Audi A4 Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog. If you like what we provide please forward on to your friends & family and share via the social media icons below; people like you are our best advertising tool!
ORDER THIS KEY FOB PART NUMBER HERE: MZ24108194
You will need 2 car keys and all remotes you want programed, control unit will handle up to 4.
Turn on ignition with key #1.
Insert key #2 in drivers door lock , turn key locking door slowly,hold the key in the lock position ,with your other hand press both buttons on the remote until the car unlocks itself.
Relock car holding key again press both buttons on remote #2 till the car unlocks itself again.
Repeat this procedure for up to 4 remotes.
Remember to leave ingition on till you are done entering remotes.
Do not try and work locks with a remote you have entered till you turn the ignition off.
Was This Information Useful? Please take a moment to Like / Follow us and share via social media below. It is people like you that help spread the word about us. It helps so much! Thanks for visiting and sharing with your friends and family!
Subscribe To Our Social Networks For Special Discounts, Offers, & Contests!
By Keyless Entry Remote Inc
