1997 Nissan Maxima Key Fob Remote Programming Instructions

Here are the programming instructions for a 1997 Nissan Maxima Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog and if you like what we provide please forward on to your friends & family; people like you are our best advertising tool!

ORDER THIS KEY FOB PART NUMBER HERE:  A269ZUA073



1.     Close and lock all doors with the driver’s side power lock/unlock switch.  

2.      Insert key into ignition and remove it from the ignition key cylinder at least six times within 10 seconds.
      Your Hazard Lamps will flash if you have performed this step successfully.  ( Withdraw key completely from ignition cylinder each time ) . If this procedure is performed too fast, system will not enter programming
      mode.

3.      Insert key into the ignition cylinder and turn to the ACC position.

4.      Within 5 seconds, push LOCK button on the keyless remote. Your Hazard Lamps should flash. ( Do not press the button more than one time in the above step). If the button is pressed more than one time, the
      programming procedure will not be successful.

5.      If there are any remaining remotes (including the old ones), unlock then lock all doors using the driver’s
      side power lock/unlock switch and within 5 seconds, push LOCK button on the next remote. Your Hazard Lamps should flash. Repeat this step for each keyless remote (including any existing keyless remotes).

 6.      Turn the key to the OFF position, remove keys from the ignition, Open door, Test RemotesWas This Information Useful?  Please take a moment to Like / Follow us and share via social media below. It is people like you that help spread the word about us.  It helps so much!  Thanks for visiting and sharing with your friends and family!