1995 Chevrolet Tahoe Key Fob Remote Programming Instructions

Here are the programming instructions for a 1995 Chevrolet Tahoe Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog and if you like what we provide please forward on to your friends & family; people like you are our best advertising tool!

ORDER THIS KEY FOB PART NUMBER HERE: 15955515




DATA LINK CONNECTOR




1.     Locate the Data Link Connector (DLC) underneath the driver's side dashboard.
Use the figure as a map for your DL ( They are not lettered on your vehicle.)
The view is looking straight into the cavities of the DLC.

2.     Connect cavity G to a ground.
Your vehicle will respond by locking and unlocking the door locks within 2 seconds.

3.     Press lock or unlock button on first remote to be programmed.
Locks will lock and unlock verifying remote was programmed.

4.     Press lock or unlock button on second remote to be programmed if applicable.
Locks will lock and unlock to verify remote was programmed.

5.     Remove jumper wire and test remote(s)


Was This Information Useful?  Please take a moment to Like / Follow us and share via social media below. It is people like you that help spread the word about us.  It helps so much!  Thanks for visiting and sharing with your friends and family!