1996 Ford Explorer Key Fob Remote Programming Instructions

Here are the programming instructions for a 1996 Ford Explorer Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog and if you like what we provide please forward on to your friends & family; people like you are our best advertising tool!

ORDER THIS KEY FOB PART NUMBER HERE: 3165189



1. Turn ignition from OFF to RUN 5 times within 10 seconds, with the
     5th time ending in RUN. Door locks will cycle to confirm
     programming mode.

2. Within 20 seconds press any button on first keyless remote.
    Door locks will cycle to confirm programming.

3. Within 20 seconds, press any button on second keyless remote.
    Door locks will cycle again to confirm programming.

4. Turn ignition to OFF. Locks will again cycle to indicate end of
     programming mode.


Was This Information Useful?  Please take a moment to Like / Follow us and share via social media below. It is people like you that help spread the word about us.  It helps so much!  Thanks for visiting and sharing with your friends and family!