2002 Mercury Villager Key Fob Remote Programming Instructions

Here are the programming instructions for a 2002 Mercury Villager Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog and if you like what we provide please forward on to your friends & family; people like you are our best advertising tool!


ORDER THIS KEY FOB PART NUMBER HERE: KOBUTA3T




1. Close and lock all doors using power switch on drivers door panel.

2. Insert and remove key from ignition (Do Not Turn) at least 6 times within 10 seconds.
    The hazard lights will flash to indicate original code has been erased.

3. Insert key and turn to ACC position. Press any button on first keyless remote.
    Hazard lights will flash to confirm programming.

4. To program additional keyless remotes, unlock and then lock the doors using power
    switch on drivers door panel.

5. Press any button on second keyless remote. Hazard lights will flash to confirm
    programming.

6. Open drivers door and remove key from ignition. Test remotes.


Was This Information Useful?  Please take a moment to Like / Follow us and share via social media below. It is people like you that help spread the word about us.  It helps so much!  Thanks for visiting and sharing with your friends and family!