2004 Kia Sedona Key Fob Remote Programming Instructions

Here are the programming instructions for a 2004 Kia Sedona Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog and if you like what we provide please forward on to your friends & family; people like you are our best advertising tool!



ORDER THIS KEY FOB PART NUMBER HERE: PLNBONTEC-T009



This is the layout of jumper pins.

   1 2                        3 4
 5   6    7   8   9  10 11 12
13 14 15 16 17 18  19  20

 ONLY TWO REMOTES CAN BE PROGRAMMED TO THIS VEHICLE.

1. Open Hood and locate diagnostic connector near battery

2. Jump pin 5 to pin 17 with a suitable jumper wire.

3. Turn ignition to the  ON position. ( DO NOT START)

4. Press LOCK button of first remote two times.

5. Press LOCK button on second remote two times. (if applicable).

5. Turn ignition OFF and remove key.

6. Disconnect jumper from diagnostic connector.

7. Check for lock and unlock operation. Horn will sound when locking.


Was This Information Useful?  Please take a moment to Like / Follow us and share via social media below. It is people like you that help spread the word about us.  It helps so much!  Thanks for visiting and sharing with your friends and family!