2008 Dodge Grand Caravan Key Fob Remote Programming Instructions

Here are the programming instructions for a 2008 Dodge Grand Caravan Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog and if you like what we provide please forward on to your friends & family; people like you are our best advertising tool!

ORDER THIS KEY FOB PART NUMBER HERE: 56046708AA





**You MUST HAVE two working programmed transmitters before
    you can add a third transmitters.

**If you only have ONE WORKING TRANSMITTER and want to add a
   second transmitter this procedure WILL NOT WORK.

***If you need to find a locksmith, try our Preferred Locksmith search to find a locksmith near you.

1.  Using first programmed transmitter turn ignition to the ON position
     for 3 seconds but no longer than 15 seconds.
     (Do not crank engine). Turn transmitter off and remove.

2.  Within 15 seconds insert second working programmed transmitter.
     Turn ignition to the ON position (Do not crank engine) After 10 seconds
     an acoustic signal will be heard and immobilizer warning lamp wil
     flash. Turn transmitter OFF and remove second programmed
     transmitter.

3.  Within 60 seconds insert third NEW non-programmed transmitter into
     ignition and turn to the ON  position (Do not crank engine).
     After 10 seconds an acoustical signal will be heard and immobilizer
     warning lamp will illuminate for 3 seconds.

4.  Turn transmitter to the OFF position and remove.

5.  Test transmitters.

      Repeat procedure for additional transmitters if required.
      A maximum of 8 transmitters can be programmed.


Was This Information Useful?  Please take a moment to Like / Follow us and share via social media below. It is people like you that help spread the word about us.  It helps so much!  Thanks for visiting and sharing with your friends and family!