Here are the programming instructions for a 1999 Mercury Villager Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog and if you like what we provide please forward on to your friends & family; people like you are our best advertising tool!
ORDER THIS KEY FOB PART NUMBER HERE: KOBUTA3T
1. Close and lock all doors using power switch on drivers door panel.
2. Insert and remove key from ignition (Do Not Turn) at least 6 times within 10 seconds.
The hazard lights will flash to indicate original code has been erased.
3. Insert key and turn to ACC position. Press any button on first keyless remote.
Hazard lights will flash to confirm programming.
4. To program additional keyless remotes, unlock and then lock the doors using power
switch on drivers door panel.
5. Press any button on second keyless remote. Hazard lights will flash to confirm
programming.
6. Open drivers door and remove key from ignition. Test remotes.
Having trouble programming the remote or just want a professional to program the remote for you? Enter your city or zip code in the search box below to find a professional key fob installer in your area.
ENTER YOUR CITY NAME OR ZIP CODE TO FIND A
PROFESSIONAL KEY FOB INSTALLER NEAR YOU
Subscribe To Our Social Networks For Special Discounts, Offers, & Contests!
By Keyless Entry Remote Inc
