Here are the programming instructions for a 2004 Hummer H2 Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog and if you like what we provide please forward on to your friends & family; people like you are our best advertising tool!
ORDER THIS KEY FOB PART NUMBER HERE: 15186200
GM KEYLESS ENTRY PROGRAMMING PROCEDURE
Collect all remotes that you wish to program. This procedure will erase all previously programmed remotes.
You must program all existing and new remotes that you wish to use on the vehicle at this time.
FCC ID: LHJ011
Interchangeable with: 15186201 15132197 10377295 15186203 21997127 15186200
1. Close all doors, insert key into ignition do not turn it.
2. Hold the UNLOCK button on the driver's side door DO NOT RELEASE until instructed to do so in step 4.
3. Quickly turn ignition from ON to OFF twice. (Do not start the car, ON is the position just before starting and OFF is where you can remove the key)
4. RELEASE the UNLOCK button. The locks will now cycle from lock to unlock signaling the vehicle has entered programming mode.
***If the locks cycle before you release the unlock button the programming will not work and your vehicle is
not in programming mode. Repeat from step one. If the locks continue to cycle before releasing the
procedure is not being followed correctly or something is malfunctioning with the vehicleâs keyless entry
5. Push and hold the LOCK and UNLOCK button at the same time on the first remote you wish to program. Hold the buttons down together until the vehicle responds by cycling the door locks (you may have to hold the buttons down for up to 5 minutes when programming a new remote â a previously paired remote will pair more quickly)Repeat the step 5 above for any additional or existing remotes or existing that you wish to program and use on the vehicle at this time.
6. Turn the key to the ON position, which exits programming mode. Programming is now complete. Test all remotes.
Having trouble programming the remote or just want a professional to program the remote for you? Enter your city or zip code in the search box below to find a professional key fob installer in your area.
ENTER YOUR CITY NAME OR ZIP CODE TO FIND A
PROFESSIONAL KEY FOB INSTALLER NEAR YOU