Here are the programming instructions for a 1995 Acura Integra Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog and if you like what we provide please forward on to your friends & family; people like you are our best advertising tool!
ORDER THIS KEY FOB PART NUMBER HERE: A269ZUA108
1. Turn ignition ON. (The position just before starting the car - do not start the car)
2. Locate and HOLD the valet/disarm button do not release until step 6.(on the dash around the steering wheel).
3. While HOLDING the valet/disarm button wait for the LED on the steering column to flash which indicates that the car is in programming mode.
4. Once the light is flashing press the panic button on the right. This is the top of the 3 buttons if the key chain is facing down. The parking lights will FLASH which confirms that the remote has been programmed successfully.
5. If you have more than one remote repeat step 4 if not proceed to step 6.
6. RELEASE the valet/disarm button.
7. Programming is now complete.
Having trouble programming the remote or just want a professional to program the remote for you? Enter your city or zip code in the search box below to find a professional key fob installer in your area.
ENTER YOUR CITY NAME OR ZIP CODE TO FIND A
PROFESSIONAL KEY FOB INSTALLER NEAR YOU
Subscribe To Our Social Networks For Special Discounts, Offers, & Contests!
By Keyless Entry Remote Inc
