Here are the programming instructions for a 1996 Cadillac Eldorado Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog and if you like what we provide please forward on to your friends & family; people like you are our best advertising tool!
ORDER THIS KEY FOB PART NUMBER HERE: 16259819
For vehicles with digital climate control units.
1. Turn key to on position. Do not start engine.
2. Press the OFF and WARM buttons together. The instrument panel will flash all lights. And Diagnostic Mode will be displayed.
3. Press Fan Down until "RFA" is displayed. Next press FAN UP until "PRGM FOB1 SO1" is displayed. Press the Warm button on the climate control a "99" should be displayed on the instrument panel. Vehicle is now in programming mode for fob "1".
4. Press and hold Trunk button and press the Lock button on the remote being programmed. The locks will cycle signaling successful programming.
5. For an additional remote press FAN UP until "RF SO2 PROGRAM FOB 2#" Next press Warm button on the climate control. Repeat previous step to program additional remote.
6. . Press and hold the Trunk button on the #1 remote, continue to hold and press the Lock button. Locks will cycle again.
7. Press Recirc of Reset to exit programming mode
For vehicle with Analog climate control units.
1. Turn key to on position. Do not start engine.
2. Press the Off button with Passenger Cooler button together. Until "RFA" is displayed then press fan up.
3. NO OVRD SOO should be displayed, press Fan UP until "PRGM FOB1 SO1" is displayed. Press the Warm button on the climate control a "99" should be displayed on the instrument panel. Vehicle is now in programming mode for fob "1".
4. Press and hold Trunk button and press the Lock button on the remote being programmed. The locks will cycle signaling successful programming.
5. For an additional remote press FAN UP until "RF SO2 PROGRAM FOB 2#" Next press Warm button on the climate control. Repeat previous step to program additional remote.
6. Press and hold the Trunk button on the #1 remote, continue to hold and press the Lock button. Locks will cycle again.
7. Press Recirc of Reset to exit programming mode2. For vehicles with analog climate control units with a dial.
Having trouble programming the remote or just want a professional to program the remote for you? Enter your city or zip code in the search box below to find a professional key fob installer in your area.
ENTER YOUR CITY NAME OR ZIP CODE TO FIND A
PROFESSIONAL KEY FOB INSTALLER NEAR YOU
Subscribe To Our Social Networks For Special Discounts, Offers, & Contests!
By Keyless Entry Remote Inc
