Here are the programming instructions for a 2000 Jaguar XJ Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog and if you like what we provide please forward on to your friends & family; people like you are our best advertising tool!
ORDER THIS KEY FOB PART NUMBER HERE: LJA2610AA
PLEASE NOTE: When you begin the programming sequence to sync your remote to your installed remote keyless entry (RKE) system, you MUST HAVE ALL OF YOUR REMOTES (Including PREVIOUSLY PROGRAMMED remote(s)) to be programmed with you at the time of programming…
ALL PREVIOUSLY PROGRAMMED REMOTES WILL BE ERASED AT THIS TIME.
(This is a safety feature which prevents anyone else from accessing your vehicle.)
KEYLESS REMOTE PROGRAMMING PROCEDURE:
AT TIME OF PROGRAMMING:
Note : All transmitters being serviced must be available. If the learning process is carried out without having all the transmitters present, all previous transmitter codes will be overwritten, rendering the missing transmitters inoperable.
1. Open the driver's door and leave it open.
2. Hold headlight flasher back toward you.
3. Turn ignition key to position 1. That's when the cigarette lighter turns on. (first click)
4. Release the headlight flasher.
5. Pull and release the headlight flasher 4 times. Alarm will enter programming mode.
6. This will be confirmed by a beep from the alarm and blink from a red light on gearshift bezel.
7. Program each transmitter (up to 5) by pressing the lock or unlock button on each transmitter once.
8. The alarm will beep when you press the transmitter button and the red light on the gearshift bezel will blink.
9. The alarm must beep 5 times to complete the programming. Therefore, if you are only programming one transmitter you should operate the transmitter 5 times.
10. If you are programming two transmitters you will operate one transmitter twice, and three times on the other.
11. For five transmitters you will operate each transmitter once.
12. Remove the key from the ignition and you are done.
Having trouble programming the remote or just want a professional to program the remote for you? Enter your city or zip code in the search box below to find a professional key fob installer in your area.
ENTER YOUR CITY NAME OR ZIP CODE TO FIND A
PROFESSIONAL KEY FOB INSTALLER NEAR YOU
Was This Information Useful? Please take a moment to Like / Follow us and share via social media below. It is people like you that help spread the word about us. It helps so much! Thanks for visiting and sharing with your friends and family!
Subscribe To Our Social Networks For Special Discounts, Offers, & Contests!
By Keyless Entry Remote Inc
