Must have 2 Existing Pre-Programmed Keys.
1. Insert one of the pre-programmed transponder keys into the ignition lock cylinder and turn the switch to the ON position.
2. The key should remain in the ON position for 5 seconds but not more than 15 seconds before you turn it back to the OFF position.
3. Within 10 seconds, insert the second pre-programmed transponder key into the ignition lock cylinder and turn the switch to the ON position. The VTSS(Vehicle Theft Security System) or Sentry Key Immobilizer System lamp (depending on model ) should start to flash. This along with an audible tone will indicate to you that the system has entered the "Customer Learn" programming mode.
4. Within 45 seconds, turn the switch to the OFF position. Insert the new transponder key and turn the switch to the ON position. After approximately 10 seconds an audible tone will sound and the Indicator lamp will stay illuminated for 3 seconds. This will be your acknowledgment that you have successfully programmed in the new transponder key.
5. To add additional keys, repeat steps 1 through 4.
2 PROGRAMMED KEYS MAY BE REQUIRED FOR SELF PROGRAMMING, PLEASE CHECK YOUR OWNERS MANUAL OR LOCAL DEALERSHIP FOR THESE DETAILS.
Having trouble programming the remote or just want a professional to program the remote for you? Enter your city or zip code in the search box below to find a professional key fob installer in your area.
ENTER YOUR CITY NAME OR ZIP CODE TO FIND A
PROFESSIONAL KEY FOB INSTALLER NEAR YOU