Here are the programming instructions for a Checkmate Alarm Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog. If you like what we provide please forward on to your friends & family and share via the social media icons below; people like you are our best advertising tool!
ORDER THIS KEY FOB PART NUMBER HERE: Checkmate
Here are written instructions:
Below is how to program car remotes with the following specs:
- FCC ID JT3KT6B
- 3 button
- Green LED
1.) Enter vehicle and close door
2.) Wait until car interior lights turn off
3.) Put car in valet mode
3a.) Turn ignition to ON and hit valet button
3b.) Alarm LED should be solid red (take key out of ignition, very important to take the key out after it enters valet mode)
4.) Within 5 seconds do the following sequence:
4a.) Turn ignition to ACCESSORY
4b.) Turn ignition to OFF
4c.) Turn ignition to ACCESSORY
4d.) Turn ignition to OFF
4e.) Turn ignition to ACCESSORY
5.) You should hear a long siren chirp
6.) Hit Button #1 on the remote (Lock)
7.) You should hear a chirp. The remote should be programmed now!
Sometimes it's tricky to the the ACCESSORY - OFF sequence right. It took me a couple tries. Hope this helps!
Note - this procedure may also work with JT3KT6A, different number of buttons, different LEDs...
Having trouble programming the remote or just want a professional to program the remote for you? Enter your city or zip code in the search box below to find a professional key fob installer in your area.
ENTER YOUR CITY NAME OR ZIP CODE TO FIND A
PROFESSIONAL KEY FOB INSTALLER NEAR YOU
ORDER THIS KEY FOB PART NUMBER HERE: Checkmate
Here are written instructions:
Below is how to program car remotes with the following specs:
- FCC ID JT3KT6B
- 3 button
- Green LED
1.) Enter vehicle and close door
2.) Wait until car interior lights turn off
3.) Put car in valet mode
3a.) Turn ignition to ON and hit valet button
3b.) Alarm LED should be solid red (take key out of ignition, very important to take the key out after it enters valet mode)
4.) Within 5 seconds do the following sequence:
4a.) Turn ignition to ACCESSORY
4b.) Turn ignition to OFF
4c.) Turn ignition to ACCESSORY
4d.) Turn ignition to OFF
4e.) Turn ignition to ACCESSORY
5.) You should hear a long siren chirp
6.) Hit Button #1 on the remote (Lock)
7.) You should hear a chirp. The remote should be programmed now!
Sometimes it's tricky to the the ACCESSORY - OFF sequence right. It took me a couple tries. Hope this helps!
Note - this procedure may also work with JT3KT6A, different number of buttons, different LEDs...
Having trouble programming the remote or just want a professional to program the remote for you? Enter your city or zip code in the search box below to find a professional key fob installer in your area.
ENTER YOUR CITY NAME OR ZIP CODE TO FIND A
PROFESSIONAL KEY FOB INSTALLER NEAR YOU
Was This Information Useful? Please take a moment to help support this blog with a donation of any amount! Your donations help keep this site up to date. If you are unable to donate, please share via social media below, your help in getting the word out about us helps just as much! Thanks for visiting, donating, and sharing with your friends and family!
