Here are the programming instructions for a 1997 Ford Windstar Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog. If you like what we provide please forward on to your friends & family and share via the social media icons below; people like you are our best advertising tool!
ORDER THIS KEY FOB PART NUMBER HERE: 3165189
Programming Instructions:
1. Insert Key and turn it to the RUN or ACC position (do not start the car.)
2. Locate the programming connector behind the passenger glove box. Two wires will be leading to the connector. The connecter will not be connected to anything. Jump the terminals inside the connector. Use either a jumper wire or bent paperclip. Make contact to the metal inside each terminal. locks will cycle or horn will chirp signaling programming mode.
3. Press any button on the remote being programmed locks will cycle or horn will chirp signaling successful programming. Repeat for additional remotes.
4. Turn off ignition remove jumper wire.
Having trouble programming the remote or just want a professional to program the remote for you? Enter your city or zip code in the search box below to find a professional key fob installer in your area.
ENTER YOUR CITY NAME TO FIND A
PROFESSIONAL KEY FOB INSTALLER NEAR YOU
Subscribe To Our Social Networks For Special Discounts, Offers, & Contests!
By Keyless Entry Remote Inc
