Here are the programming instructions for a 1999 Dodge Neon Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog. If you like what we provide please forward on to your friends & family and share via the social media icons below; people like you are our best advertising tool!
ORDER THIS KEY FOB PART NUMBER HERE: 05014736AA
Programming Instructions:
1. Locate programming connector it will be a green wire with a red connector on the end. The programming connector will be located on the passenger side trim cowls towards the top.
2. Use a jumper wire or paperclip to jump the programming connector. Connect one end of the wire or clip to the metal inside the connector and the other end to a metal surface of the car.
3. Insert key to the ignition and turn it to the On position ( this will not start the car). Press any button on the remote being programmed locks will cycle to confirm programming. Repeat for any additional remotes.
4. Remove clip or wire to end programming.
Having trouble programming the remote or just want a professional to program the remote for you? Enter your city or zip code in the search box below to find a professional key fob installer in your area.
ENTER YOUR CITY NAME TO FIND A
PROFESSIONAL KEY FOB INSTALLER NEAR YOU
Subscribe To Our Social Networks For Special Discounts, Offers, & Contests!
By Keyless Entry Remote Inc
