Here are the programming instructions for a 2001 Lincoln Navigator Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog. If you like what we provide please forward on to your friends & family and share via the social media icons below; people like you are our best advertising tool!
ORDER THIS KEY FOB PART NUMBER HERE: 3B:2L3T-15K601-AB
1. Close all doors then open drivers door press unlock button on drivers door while door is open. Insert key into ignition. Keep foot off brake pedal.
2. Turn ignition from Off to Run 8 times ending in Run ( Do not start the car, run position is just before the vehicle will start Off is turned all the way back when the key can be removed from the ignition). Must be performed within 10 seconds. Locks will cycle signaling entering into programming mode.
3. Press any button on the remote being programmed, locks cycle confirming programming. Repeat this step for any addition remotes.
4. Turn key to off, locks will cycle to end programming mode.
Having trouble programming the remote or just want a professional to program the remote for you? Enter your city or zip code in the search box below to find a professional key fob installer in your area.
ENTER YOUR CITY NAME TO FIND A
PROFESSIONAL KEY FOB INSTALLER NEAR YOU
Subscribe To Our Social Networks For Special Discounts, Offers, & Contests!
By Keyless Entry Remote Inc