Enforcer Aftermarket Key Fob Remote Programming Instructions

Here are the programming instructions for a Enforcer Aftermarket Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog. If you like what we provide please forward on to your friends & family and share via the social media icons below; people like you are our best advertising tool!

ORDER THIS KEY FOB PART NUMBER HERE: ERY919A2

Method of Programming:

1.  Disarm the alarm,

2.  Turn of the ignition

3.  Press VEТ switch within 4 seconds after the ignition is turned on

Press VEТ switch 1 time - set to Mode 1
Press VET switch 2 times - sat to Mode 2
Press VEТ switch 3 times - set to Mode 3
Press VEТ switch 4 times - set to Preset

Having trouble programming the remote or just want a professional to program the remote for you? Enter your city or zip code in the search box below to find a professional key fob installer in your area.

ENTER YOUR CITY NAME TO FIND A
PROFESSIONAL KEY FOB INSTALLER NEAR YOU

Was This Information Useful?  Please take a moment to help support this blog with a donation of any amount!  Your donations help keep this site up to date.  If you are unable to donate, please share via social media below, your help in getting the word out about us helps just as much!  Thanks for visiting, donating, and sharing with your friends and family!