Here are the programming instructions for a 1997 Chevrolet Malibu Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog. If you like what we provide please forward on to your friends & family and share via the social media icons below; people like you are our best advertising tool!
ORDER THIS KEY FOB PART NUMBER HERE: 16245100-29
1. Turn ignition off.
2. Locate programming connector in the trunk. It is a plastic connector with two wires black and white leading to it, the connector will not be connected to anything. Will be located in the center of the rear shelf.
3. Must jump the connectors inside the two terminals of the programming connector. Use are jumper wire or a bent paperclip. Locks will cycle to lock to unlock.
3. Hold lock and unlock on the remote being programmed for 15 seconds. Locks will cycle again confirming programming. Repeat for additional remotes.
4. Remove jumper wire or clip to exit programming mode.
Having trouble programming the remote or just want a professional to program the remote for you? Enter your city or zip code in the search box below to find a professional key fob installer in your area.
ENTER YOUR CITY NAME TO FIND A
PROFESSIONAL KEY FOB INSTALLER NEAR YOU