Here are the programming instructions for a 2009 Dodge Journey Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog. If you like what we provide please forward on to your friends & family and share via the social media icons below; people like you are our best advertising tool!
ORDER THIS KEY FOB PART NUMBER HERE: 68058346 or 68058346AC or 5026331
**You MUST HAVE two working programmed transmitters before you can add a third transmitters.
**If you only have ONE WORKING TRANSMITTER and want to add a second transmitter this procedure WILL NOT WORK.
*** Click here to Find a Locksmith in your area to program transmitter if you only have one or none working transmitters.
1. Using first programmed transmitter turn ignition to the ON position for 3 seconds but no longer than 15 seconds. (Do not crank engine). Turn transmitter off and remove.
2. Within 15 seconds insert second working programmed transmitter.Turn ignition to the ON position (Do not crank engine) After 10 seconds an acoustic signal will be heard and immobilizer warning lamp will flash. turn transmitter OFF and remove second programmed transmitter.
3. Within 60 seconds insert third NEW non-programmed transmitter into ignition and turn to the ON position (Do not crank engine). After 10 seconds an acoustical signal will be heard and immobilizer warning lamp will illuminate for 3 seconds.
4. Turn transmitter to the OFF position and remove.
5. Test transmitters.
****Repeat procedure for additional transmitters if required. A maximum of 8 transmitters can be programmed.
Having trouble programming the remote or just want a professional to program the remote for you? Enter your city or zip code in the search box below to find a professional key fob installer in your area.
ENTER YOUR CITY NAME TO FIND A
PROFESSIONAL KEY FOB INSTALLER NEAR YOU
ORDER THIS KEY FOB PART NUMBER HERE: 68058346 or 68058346AC or 5026331
**You MUST HAVE two working programmed transmitters before you can add a third transmitters.
**If you only have ONE WORKING TRANSMITTER and want to add a second transmitter this procedure WILL NOT WORK.
*** Click here to Find a Locksmith in your area to program transmitter if you only have one or none working transmitters.
1. Using first programmed transmitter turn ignition to the ON position for 3 seconds but no longer than 15 seconds. (Do not crank engine). Turn transmitter off and remove.
2. Within 15 seconds insert second working programmed transmitter.Turn ignition to the ON position (Do not crank engine) After 10 seconds an acoustic signal will be heard and immobilizer warning lamp will flash. turn transmitter OFF and remove second programmed transmitter.
3. Within 60 seconds insert third NEW non-programmed transmitter into ignition and turn to the ON position (Do not crank engine). After 10 seconds an acoustical signal will be heard and immobilizer warning lamp will illuminate for 3 seconds.
4. Turn transmitter to the OFF position and remove.
5. Test transmitters.
****Repeat procedure for additional transmitters if required. A maximum of 8 transmitters can be programmed.
Having trouble programming the remote or just want a professional to program the remote for you? Enter your city or zip code in the search box below to find a professional key fob installer in your area.
ENTER YOUR CITY NAME TO FIND A
PROFESSIONAL KEY FOB INSTALLER NEAR YOU
By Keyless Entry Remote Inc
