Here are the programming instructions for a 1995 Dodge Ram 3500 Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog. If you like what we provide please forward on to your friends & family and share via the social media icons below; people like you are our best advertising tool!
ORDER THIS KEY FOB PART NUMBER HERE: 56007049
1. Collect all remotes that you wish to program. This procedure will erase all previously programmed remotes. You must program all existing and new remotes that you wish to use on the vehicle at this time.
2. Open drive door. Insert key into ignition and turn it to the on position. Do not start the car. Press and hold the programming button located on the bottom to the driver's dash board. Locks will cycle to signal entering into programming mode. Do not release button
3. Press top left on the remote being programmed, locks will cycle again. Repeat this step for any additional remotes.
4. Release programming button to exit programming mode.
Having trouble programming the remote or just want a professional to program the remote for you? Enter your city or zip code in the search box below to find a professional key fob installer in your area.
ENTER YOUR CITY NAME TO FIND A
PROFESSIONAL KEY FOB INSTALLER NEAR YOU
By Keyless Entry Remote Inc
