Here are the programming instructions for a Honda and Acura Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog. If you like what we provide please forward on to your friends & family and share via the social media icons below; people like you are our best advertising tool!
If you are unable to find your exact year make and model key fob programming instructions, try these generic Honda and Acura key fob remote programming instructions.
ORDER THIS KEY FOB PART NUMBER HERE: Honda and Acura
1. Gather all remotes for the vehicle on hand. You only need one remote to get into program mode but all remotes must be programmed during the same session. The car will "forget" previous remotes every time it is reprogrammed.
2. Sit in the car with all doors/trunk tightly closed.
3. Turn the key to the ON position, marked by “II†on the ignition bezel so the dash lights come on.
4. Listen for a quiet click, and then within 5 seconds press the “Lock†button on the remote for 1 second.
5. Turn the key to the OFF position, marked by “I†on the ignition bezel so the dash lights go off. If you hear a quiet click in the dashboard after turning switch to "I" then the entire process must be restarted.
6. Repeat three more times (for a total of 4 times).
7. Upon the 4th turning of the key to “ONâ€, press the lock button on one remote, the locks will make a cycling sound (clunk), locks will NOT lock or unlock at this point, they will just make a noise. The system is now in programming mode. Do not turn key off.
8. Within 5 seconds of entering programming mode and within 5 seconds of each other, press the lock button ON EACH remote you are programming, for a second or so and release. Each time a remote button is pushed, the locks should cycle. Up to 3 remotes can be programme.
9. Turn ignition completely off and remove the key.
10. Step out of car and close door. The remotes should be programmed and work. If you have a trunk/hatch release, the button for this feature needs to be held for a few seconds before the trunk/hatch will “popâ€.
Having trouble programming the remote or just want a professional to program the remote for you? Enter your city or zip code in the search box below to find a professional key fob installer in your area.
ENTER YOUR CITY NAME TO FIND A
PROFESSIONAL KEY FOB INSTALLER NEAR YOU
If you are unable to find your exact year make and model key fob programming instructions, try these generic Honda and Acura key fob remote programming instructions.
ORDER THIS KEY FOB PART NUMBER HERE: Honda and Acura
1. Gather all remotes for the vehicle on hand. You only need one remote to get into program mode but all remotes must be programmed during the same session. The car will "forget" previous remotes every time it is reprogrammed.
2. Sit in the car with all doors/trunk tightly closed.
3. Turn the key to the ON position, marked by “II†on the ignition bezel so the dash lights come on.
4. Listen for a quiet click, and then within 5 seconds press the “Lock†button on the remote for 1 second.
5. Turn the key to the OFF position, marked by “I†on the ignition bezel so the dash lights go off. If you hear a quiet click in the dashboard after turning switch to "I" then the entire process must be restarted.
6. Repeat three more times (for a total of 4 times).
7. Upon the 4th turning of the key to “ONâ€, press the lock button on one remote, the locks will make a cycling sound (clunk), locks will NOT lock or unlock at this point, they will just make a noise. The system is now in programming mode. Do not turn key off.
8. Within 5 seconds of entering programming mode and within 5 seconds of each other, press the lock button ON EACH remote you are programming, for a second or so and release. Each time a remote button is pushed, the locks should cycle. Up to 3 remotes can be programme.
9. Turn ignition completely off and remove the key.
10. Step out of car and close door. The remotes should be programmed and work. If you have a trunk/hatch release, the button for this feature needs to be held for a few seconds before the trunk/hatch will “popâ€.
Having trouble programming the remote or just want a professional to program the remote for you? Enter your city or zip code in the search box below to find a professional key fob installer in your area.
ENTER YOUR CITY NAME TO FIND A
PROFESSIONAL KEY FOB INSTALLER NEAR YOU
By Keyless Entry Remote Inc
