Here are the programming instructions for a 2007 Mercury Montego Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog. If you like what we provide please forward on to your friends & family and share via the social media icons below; people like you are our best advertising tool!
ORDER THIS KEY FOB PART NUMBER HERE: 2S4T-15K601
1. Turn ignition from Off to Run 8 times ending in Run ( Do not start the car, run position is just before
the vehicle will start Off is turned all the way back when the key can be removed from the ignition ).
Must be performed within 10 seconds. Locks will cycle signaling entering into programming mode. Keep
foot off brake pedal.
2. Press any button on the remote being programmed, locks cycle confirming programming. Repeat this
step for any addition remotes.
3. Turn key to off, locks will cycle to end programming mode.
ENTER YOUR CITY NAME TO FIND A
PROFESSIONAL KEY FOB INSTALLER NEAR YOU