Here are the programming instructions for a 2000 Suzuki Vitara Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog. If you like what we provide please forward on to your friends & family and share via the social media icons below; people like you are our best advertising tool!
ORDER THIS KEY FOB PART NUMBER HERE: B23AT54
Have all remotes including working ones in possession when performing this procedure.
1. Locate keyless entry module* located under the drivers side dash. You may need to lay on the floor and look up underneath to locate.
2. The keyless entry module will have a red LED light on one side of it. Next to the red LED there will be a small push switch. Using a small pointy object, push down on the push switch until the red LED begins to flash. The LED flashing indicates the vehicle is ready to accept new remotes.
3. Press and release the LOCK button on the new remote. The red LED will light solid then begin to flash indicating the remote was accepted.
4. Within 5 seconds repeat step 3. for additional remotes including working ones.
5. Test all remotes.
Having trouble programming the remote or just want a professional to program the remote for you? Enter your city or zip code in the search box below to find a professional key fob installer in your area.
ENTER YOUR CITY NAME TO FIND A
PROFESSIONAL KEY FOB INSTALLER NEAR YOU