Here are the programming instructions for a 1997 Cadillac Deville Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog. If you like what we provide please forward on to your friends & family and share via the social media icons below; people like you are our best advertising tool!
ORDER THIS KEY FOB PART NUMBER HERE: 16259819
Programming Instructions:
Obtain all remote transmitters for this vehicle.
Use these instructions if your Deville has an Analog Instrument Cluster
1. Press OFF and WARM buttons on Climate Control Panel (CCP) simultaneously. (Instrument Panel Cluster (IPC) will light all telltales, then go blank) System is now in diagnostic mode. Press PASSENGER COOLER button until “RFA†is displayed, then press FAN UP. If “RFA DATA†is displayed, press FAN DOWN. If “RFA OVERRIDE†is displayed, press FAN UP.
2. If “RFA 500 NO OVERRIDE†is displayed, press FAN DOWN. If “RFA 501 PROGRAM FOB #1†is displayed, Press FAN UP.
3. IPC will show “0†on right side of Driver Information Center (DIC) display. Press warmer button on climate control unit until “99†is displayed.
4. Press and hold TRUNK button on transmitter. While holding TRUNK button, press LOCK button and hold for one second. Hold both buttons for a total of 3 seconds. Locks cycle when programming is complete (if remote is not programmed within 30 seconds after entering “99†override display, system will default and you must begin again at step 2.
(If locks don't cycle in step 4 try again holding down the the trunk and lock button SIMULTANEOUSLY for 10 seconds or until the locks cycle)
5. To program a second remote, press FAN DOWN button until “RFA 502 PROGRAM FOB #2†is displayed, then press FAN UP. Repeat step 4.
To exit system, press AUTO, MODE UP, MODE DOWN, or RESET.
Use these instructions if your DeVille has a Digital Instrument Cluster
1. Press OFF and WARM buttons on Climate Control Center (CCC) simultaneously. Instrument Panel Cluster (IPC) will light all telltales, go blank then enter DIAGNOSTIC MODE. Press FAN DOW button to scroll through system until “RFA†is displayed, then press FAN UP button. Press FAN DOWN button until “RFA OVERRIDE†is displayed, then press FAN UP button. When “NO OVRD RF 500†is displayed, then press FAN UP button.
2. When “PGM FOBL 501†is displayed, press WARM button and “99†will be displayed in left upper corner of IPC just below odometer. System is now ready to program remote.
3. Press and hold TRUNK button on transmitter. While holding TRUNK button, press LOCK button and hold for one second. Hold both buttons for a total of 3 seconds. Locks cycle when programming is complete (if remote is not programmed within 30 seconds after entering “99†override display, system will default and you must begin again at step 2.)
4. To program second remote, pres FAN UP button until “PGM FOB2 502†is displayed, then follow steps 2 and 3 toprogram second remote.
To exit system, press RECIRC or RESET buttons.
Having trouble programming the remote or just want a professional to program the remote for you? Enter your city or zip code in the search box below to find a professional key fob installer in your area.
ENTER YOUR CITY NAME TO FIND A
PROFESSIONAL KEY FOB INSTALLER NEAR YOU
By Keyless Entry Remote Inc
