1997, 1998, 1999, 2000, and 2001 Audi A6 Key Fob Remote Programming Instructions

Posted by Unknown on Oct 16th 2015

Here are the programming instructions for a 1997, 1998, 1999, 2000, and 2001 Audi A6 Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have to visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog. If you like what we provide please forward on to your friends & family and share via the social media icons below; people like you are our best advertising tool!

ORDER THIS KEY FOB PART NUMBER HERE: 4D0 837 231 E

Programming Instructions:

NOTE: A maximum of 4 keys can be programmed (one at a time)

1. Memory position of existing keys can be identified using diagnostic equipment

2. If diagnostic equipment available

Locate vacant memory position for new key
Locate memory position of key to be replaced
Carry out programming procedure for this key only

3. If diagnostic equipment not available: Obtain and reprogram all keys

NOTE: Existing key memory positions will be overwritten

Manually unlock driverâ€™s door using key
Switch ignition ON. Use key not fitted with remote transmitter
Manually lock driverâ€™s door using key

-Complete the following within 30 seconds-
Within 5 seconds press UNLOCK button on first key once (programs memory position 1)
Indicator lamps flash once to indicate signal received
Wait 5 seconds
Press UNLOCK button once to confirm programming
Vehicle unlocks. Programming mode deactivated
Switch ignition OFF. Remove key

4. To program remaining keys into memory positions 2, 3, and 4: Carry out complete procedure below for each key

Switch ignition ON. Use key not fitted with remote transmitter
Manually lock driverâ€™s door using key
Within 5 seconds press UNLOCK button at 1 second interval, as follows:

Twice for memory position 2 (second key).
Three times for memory position 3 (third key)
Four times for memory position 4 (fourth key)

Indicator lamps flash once every time UNLOCK button is pressed in to indicate signal received
Wait 5 seconds
Press UNLOCK button once to confirm programming
Vehicle unlocks. Programming mode deactivated

5. Switch ignition OFF. Remove key.
NOTE: ignition MUST be switched OFF between each key programming procedure

Having trouble programming the remote or just want a professional to program the remote for you? Enter your city or zip code in the search box below to find a professional key fob installer in your area.

ENTER YOUR CITY NAME TO FIND A
PROFESSIONAL KEY FOB INSTALLER NEAR YOU