click to zoom in

Lexus HYQ1512V OEM 3 Button Key Fob 1.5" Blade D-chip

No reviews yet Write a Review
Dealer price: $219.95
(You save $71.18 )
Part Number:
Interchange Part Number:
Battery Size:
CR2016 (sold separately)
Keyless Entry Remote Car Key Fob
3 Button
5% Off Orders $55 Or More
  • Discount applied in cart
  • Cannot be combined with other discounts or offers
  • Discounts do not apply to professional programming and key cutting equipment
15% Off Any 2 or More Key Fobs
  • Discount applied in cart
  • Cannot be combined with other discounts or offers
  • Offer only valid for in stock products
  • Discounts do not apply to professional programming and key cutting equipment


Free Standard Shipping & Returns

on Orders of $55 or More
Shipping to:35260

Get it by Fri ,Nov 27 with Express Shipping

Lexus HYQ1512V OEM 3 Button Key Fob 1.5" Blade D-chip

Dealer price: $219.95
(You save $71.18 )

Related Products

This is a Factory OEM (Original Equipment Manufacturer) Lexus 3 Button keyless entry remote, aka "key fob".

OEM electronics in a new aftermarket case with uncut 1.5" key.

Note: There are two different key lengths. Please measure your existing key to be sure you are ordering the correct one for your vehicle.


  • 2009 Lexus RX350
  • 2008 Lexus RX350
  • 2008 Lexus RX400h
  • 2007 Lexus RX350
  • 2007 Lexus RX400h
  • 2006 Lexus RX330
  • 2006 Lexus RX400h
  • 2005 Lexus RX330
  • 2004 Lexus RX330

  • The key must be laser cut by a qualified auto locksmith or dealer before programming.
  • Please familiarize yourself with the procedure before starting.
  • These instructions will only work if you have an existing MASTER key if you have a grey valet key this procedure WILL NOT work and you must have this key cut and programmed at the dealer!
  • After programmed, the panic and trunk features must be pressed and held down for 3 seconds in order to function.
Key Programming:
  1. Insert an already programmed master key into the ignition. Do not turn.
  2. Press and release the gas pedal 5 times.
  3. Press and release the brake pedal 6 times.
  4. Remove the key from the ignition.
  5. Insert the new key you want to program into the ignition.
  6. Press and release the gas pedal one time.
  7. Wait 1 minute. The security light will be blinking for this one minute. When it stops blinking your key is programmed. To end programming, step on the brake one time.

Look for your security light. This light will guide you during the programming procedure. The security light will go off at Step 1. It will remain off until Step 6. The security light will be come on and start blink after Step 6 until the key is programmed. If the security light comes on after Step 4, STOP the procedure and start over again. If you perform this procedure too slowly your car will not go into programming mode. If you cannot get your car to go into programming mode make sure you are using a master key and not a valet key. If you have a master key then you will probably need to perform this procedure more quickly.

Remote Programming:
  1. Begin with the key out of the ignition.
  2. OPEN and UNLOCK the DRIVER'S side door. CLOSE all other doors including the trunk.
  3. Within 5 seconds INSERT the key into the ignition and PULL it out TWICE.
  4. CLOSE then OPEN the DRIVER's side door TWICE.
  5. Insert key INTO the ignition then REMOVE it.
  6. CLOSE then OPEN the DRIVER's side door TWICE.
  7. Insert the key INTO the ignition and LEAVE it in ignition.
  8. CLOSE the DRIVER's side door.
  9. Switch the ignition to ON then OFF.
  10. REMOVE the key from ignition.
  11. The door locks will now cycle to confirm the vehicle has successfully entered programming mode.
  12. PUSH and HOLD the LOCK and UNLOCK button for 1.5 seconds on the first remote being programmed. As soon as you let go PUSH the LOCK button and HOLD it for 2 seconds.
  13. The door locks will cycle to confirm successful programming of the remote. If you have any additional remotes to program repeat step 12 if you have no additional remotes proceed to step 14.
  14. OPEN the DRIVER'S side door. Programming is now complete.

We are proud to offer true OEM key fobs direct to you at up to 80% off dealer prices. There is a catch though, so here it goes:

You need to know the only way to get a NEW OEM key fob is to go to a dealer or authorized reseller of OEM parts, and you will pay dealer prices if you do this and spend hundreds of dollars.

The key fob you are going to purchase from us is used or as we like to say "previously loved". We recycle OEM key fobs and put them through a rigorous refurbishing process so we can guarantee our products and offer them at a reasonable price along with saving the environment. Oh, and we are not robbing you of your hard earned dollars like the stealership does. So if you are good with all of this what are you waiting for? Make your life easier, order a key fob from us and save the world!

Lexus HYQ1512V Factory OEM KEY FOB Keyless Entry Remote Alarm Replace

We Are The Experts

Unmatched, expert support for ANY keyless remote issue. We've got your back!

Need Help?

Stay In The Know

Sign up for Keyless Entry Remote's News, Sales, and Deals.

Join Our Mailing List

Programming Instructions

Remote & Transponder Key Programming Instructions for over 5,000 vehicles!

Find Yours