Keyless Entry Remote
close
close
Limited Time Offer! 15% Off Any 2 or More Key Fobs

Futura Auto | Clamping Track Keys - Part 8

Futura Auto

Part 8: Clamping Track Keys
  • 01RA clamp (Used for laser or track cut keys)
    • Installing the 01RA clamp
      • Align the dovetails on the bottom of the clamp with the dovetails on the platform.
      • Slide into position and lock in place with the allen screw on the right side.
  • The Futura Auto clamps the track key on the neck of the blade
  • Track keys are gauged either on the shoulder or on the tip.
    • A majority of track keys are gauged on the tip.
      • Insert the key into the opening
      • All of the cut edges need to be loaded into the clamp
      • Make sure the tip of the key has not gone past the backside of the clamp
      • Hold the key flat and tighten into place
      • Automatic tip detection is used so you don’t need to use a tip stop.
    • When gauging a key from the shoulder you will use the shoulder stop gauge.
      • Insert the gauge into the grooves on the clamp
      • Slide the key all the way through the gauge until the shoulder butts up against the shoulder stop
      • Hold the key flat in the jaw and tighten into place
      • Remove the shoulder stop
    • Some two track keys, like the HU 66, due to the cut in the profile on the side of the blade requires the A45 adapter so that the key is held straight in the jaw.
      • To install the A45 adapter onto the Futura Auto
      • Align the pin on the bottom of the adapter with the grove on the front right side of the jaw.
      • Insert the key into the jaw and clamp into place.

This goes inside the p: There are no products listed under this category.

We Are The Experts

Unmatched, expert support for ANY keyless remote issue. We've got your back!

Need Help?

Stay In The Know

Sign up for Keyless Entry Remote's News, Sales, and Deals.

Join Our Mailing List

Programming Instructions

Remote & Transponder Key Programming Instructions for over 5,000 vehicles!

Find Yours