Keyless Entry Remote
Limited Time Offer! 15% Off Any 2 or More Key Fobs

Futura Auto | Cutting Standard or EC Keys - Part 6

Futura Auto

Part 6: Cutting Standard or EC Keys
  • From the home page, select search then vehicle keys
    • Select vehicle make and start to type in make, on the right select the vehicle make.
    • Type in the model and select the model on the right.
    • Select the model year
    • You will see a screen that shows the code series for that vehicle
      • Taping the green card button you will see the technical details related to this cutting card, including; depth measurements, spacing measurements, cutting angle and blank dimension.
      • To cut the key by indirect code, select code on the right side, enter the code and search for that code.
        • You will see the cuts for that specific code, select ok.
        • You will see a graphic of what the cut key will look like, along with the key cuts.
        • To cut the key, select cut in the bottom right corner.
        • Information regarding what clamp, cutter and tip stop you should use are shown.
        • Setup the Futura Auto with the clamp, cutter and tip stop shown on the screen.
        • Slide the key on the jaw, all the way against the tip stop, lock into place and remove tip stop tool.
        • Lower the safety shield and select start on the tablet.
        • Once side one is cut, remove key and flip to cut side two.
      • If you do not know the code for the key but you know the cuts, you can select cuts and manually enter the key cuts.
      • To decode a key
        • Select decode and load the key as directed
        • Press start and lower the mobile tracer
      • Manual corrections can be used to make corrections to cuts due to worn keys.
      • Partial cuts can be used with broken keys, enter the known cuts search for possible codes that are used to cut that key.
      • Card options let you adjust the cut type, cutter and clamp.
      • Info card shows what cutter, clamp, clamp side and tip stop point.
      • Queue of job can be used to save and access unfinished jobs.
      • Measurements display space and depth measurements.

This goes inside the p: There are no products listed under this category.

We Are The Experts

Unmatched, expert support for ANY keyless remote issue. We've got your back!

Need Help?

Stay In The Know

Sign up for Keyless Entry Remote's News, Sales, and Deals.

Join Our Mailing List

Programming Instructions

Remote & Transponder Key Programming Instructions for over 5,000 vehicles!

Find Yours